Pumpkin Projection Overall Setup
- Setup pumpkins
- Setup video player: DVD player, laptop, tablet, phone, or other video device
- Connect video player to the projector
- Setup projector
- Select video(s) and play
- Adjust projector distance, focus, scale, and orientation
- Setup audio player: Boom box, powered computer speakers, full stereo
- Connect audio player to the video player or projector
- Review and adjust
Find the right pumpkins for your projection. If you are using the AtmosFEARfx Jack-O’-Lantern Jamboree, be sure to buy the pumpkins in the correct sizes. Below is a photo provided by AtmosFEARfx to give you an idea of what size pumpkins would work best. When placing your pumpkins, be sure to take the position of the projector into consideration. Depending on your projector and it’s settings, you may have to position the projector at a specified distance which require you to hide your projector differently.
Setup Video Player
Depending on your media type, you may be playing your video on a DVD player, Blu-ray player, game console, iPod/iPhone/iPad, or other smartphone or tablet. If you purchased a disc or digital file, you should attempt to play it prior to your setup just in case it doesn’t work. You don’t want to be in a rush the night of Halloween. For example, the AtmosFEARfx DVDs will not play on a Blu-ray player (as of this writing).
If you are playing a digital file on a laptop, smartphone or tablet, you should verify which video player you want to use. You wouldn’t want to pick a video player that will display the controls and border of the player. You need to have a player that can go full screen so the device software isn’t displayed in your projection. Turn the repeat/loop feature on. You don’t want to run back repeatedly to start the video again and again. Watch what the video player does when it starts the video loop again. Do the controls pop up? If so, try another video player. I found that Windows® Video Player does a good job looping single files.
Prepare the audio and video out of the player. Are you using an HDMI cable, component cables, composite cable, VGA, or DVI. Depending on the type of video you use, audio is not carried through all cables. HDMI is the only video/media cable that carries audio. Most setups will require that the audio be run out of the video player into the audio player. Use your audio cables, white (left/mono) and red (right/stereo).
Plug in the video cable coming from the video player into the video inputs on the projector. Turn on your projector and see if it works. Project your video onto the pumpkins. Make adjustments as needed. If you are using a laptop or PC, you many have to change the video output options. You can mirror or use your projector as a second monitor. If you will be changing videos often, you may want to use your projector as a second monitor.
If you have never setup a projector before, watch the video below for a 101 tutorial.
Setup Audio Player
Position your audio player to point towards your on-lookers. Connect the video player to the audio player using the audio out (RCA connectors white and red) on the video player to the audio in on the audio player. Some video players and some audio players may have a mini-jack output or input respectively. You can convert an RCA cable to a mini-jack cable with an adapter.
|RCA Audio Cable||RCA to Mini-Jack Adapter||Mini-Jack Size Adapter||Mini-Jack 1/8″ Cable||Mini-Jack 1/4″ Cable|
Review and Adjust
Review your setup. If needed adjust the projector and settings. Check the audio for volume and adjust as needed.
If you have any alternatives or suggestions, please feel free to leave a comment below.